Hotpoint-ariston SL D16 APR User Manual download pdf (Page 21)

hotpoint.eu

all the parts are in the correct position to allow

lid closure.

19. Close the dust compartment lid until it clicks

into place.

ATTACHMENTS

The attachments can either be supplied as

standard features (based on the model) or be

purchased separately from Hotpoint authorised

centres.

Before changing an attachment, during

maintenance, disconnect the plug from

the electrical socket. Do not use aggressive

substances or abrasive materials to clean the

appliance, its internal parts and attachments.

Make sure the appliance is thoroughly dry

before using it again.

Standard/Carpet brush (K)

The standard/carpet brush (1) is suitable for

vacuuming hard and smooth oors as well

as carpets on a daily basis. Use the bristle-

adjustment pedal (2) to clean:

Hard oors

Carpets

To clean the plastic parts of the standard/carpet

brush, remove the brush from the metal extension

pipe (8) and wipe with a dry or slightly damp soft

cloth. To clean the bristles, remove any dirt using,

if needed, the precision nozzle (26).

Parquet brush (L)

The Parquet brush (3) is suitable for vacuuming

delicate areas such as wooden oors. The special

natural bristles enable you to use on very delicate

surfaces without harm. To clean the plastic parts

of the Parquet brush, remove the brush from the

metal extension pipe (8) and wipe with a dry or

slightly damp soft cloth. To clean the bristles, suck

up any dirt using the precision nozzle (26).

Turbo brush (M)

The Turbo brush (4) is ideal for the in-depth

vacuuming of short-pile carpets and removing

pet hair. The rotation of the brush is operated

by the vacuum cleaner's suction power.To clean

the plastic parts of the Turbo brush, remove the

brush from the metal extension pipe (8) and wipe

with a dry or slightly damp soft cloth. Remove any

releasing the opening tab.

3. Wash the lter under running water, taking

care that the jet of water is not too strong.

4. Hold it so that the water ows parallel to its

folds.

5. Let it dry at room temperature until all of it’s

parts are thoroughly dry.

6. Re-place the Pure Clean Hepa 13 lter,

paying attention to the positions of the

notches.

7. Fit the air grill into its housing until it clicks

into place.

To clean the dust compartment lters (38):

8. Press the dust-compartment opening button

(13) to open the dust compartment (14).

9. Remove the dust container (39).

10. Release the opening tab and then remove

the Pure Clean Hepa 13 lter, pre-lter (41)

and lter protection grill (40).

11. When cleaning the lter protection grill,

remove any dust/powder residues with a

small brush. If needed, use a damp soft

cloth.

12. Clean the pre-lter by washing it under

running water, taking care that the jet of

water is not too strong. Allow to dry.

13. Wash the Pure Clean Hepa 13 lter under

running water, taking care that the jet of

water is not too strong.

14. Hold it so that the water ows parallel to its

folds.

15. Let it dry at room temperature until all its

parts are thoroughly dry.

Make sure all its parts are thoroughly

dry before replacing them.

16. Fit the pre-lter into the special indentation

of the Pure Clean Hepa 13 lter, locking both

lters in place using the protection grill.

17. Fit the pre-lter, Pure Clean Hepa 13 lter

and protection grille assembly onto the dust

container, paying attention to the positions of

the notches, until it clicks into place.

18. Re-place the dust container into the dust

compartment.

The appliance is equipped with a safety

device that prevents the dust

compartment lid from closing unless the dust

container has been correctly installed. Do not

force the dust bag lid to close it and make sure

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 85 86

Hotpoint-ariston SL D16 APR User Manual Page 21

Comments to this Manuals

Hotpoint-ariston SL D16 APR User Manual Page 21

Comments to this Manuals

Related products and manuals for Vacuums Hotpoint-ariston SL D16 APR