Hotpoint-ariston ARTXL 109 User Manual download pdf (Page 7)

Wash

Rinse

Spin

Drain

End of wash cycle

Fig. 1

Fig. 2

Fig. 3

Fig. 4

A) Opening (Fig. 1):

Lift the external lid and open it completely.

B) Opening the drum (Soft opening):

With one finger, push the button indicated in fig. 2

and the drum will open delicately.

C) Loading the washing machine (Fig. 3).

D) Shutting (Fig. 4):

- close the drum fully by first shutting the front

door followed by the rear one;

- then ensure the hooks on the front door are

perfectly housed within the seat of the rear door;

- after the hooks have clicked into position, press

both doors lightly downwards to make sure they

do not come loose;

- finally shut the external lid.

Starting a wash cycle

1. Turn the washing machine on by pressing the

ON/OFF button. All the indicator lights will turn on for a few

seconds, then only the indicator lights relative to the selected

programme settings will remain lit and the START/PAUSE

indicator light will flash.

2. Load the laundry, close the door and the lid.

3. Set the WASH CYCLE knob to the desired programme.

4. Set the washing temperature (see “Personalisation”).

5. Set the spin speed (see “Personalisation”).

6. Measure out the detergent and washing additives (see

“Detergents and laundry”).

7. Select the desired functions.

8. Start the wash cycle by pressing the START/PAUSE button

and the corresponding indicator light will remain lit in a fixed

manner, in green.

To cancel the set wash cycle, pause the machine by pressing

the START/PAUSE button and select a new cycle.

9. At the end of the wash cycle the indicator light will

switch on. The LID LOCKED indicator light will switch off,

indicating that the door may be opened. Take out your

laundry and leave the appliance door ajar to make sure the

drum dries completely.

Switch the washing machine off by pressing the ON/OFF

button.

Function buttons and corresponding indicator lights

When a function is selected, the corresponding indicator

light will illuminate.

If the selected function is not compatible with the program-

med wash cycle, the corresponding indicator light will flash

and the function will not be activated.

If a function which is incompatible with another function

selected previously, only the most recent selection will

remain active.

Lid locked indicator light

If this indicator light is on, the appliance door is locked to prevent

it from being opened accidentally; to avoid any damage, wait for

the indicator light to switch off (it will take about three minutes)

before you open the appliance door.

N.B. If the DELAY TIMER function is activated, the door

cannot be opened; pause the machine by pressing the

START/PAUSE button if you wish to open it.

! If the START/PAUSE indicator light (orange) flashes

rapidly at the same time as the function indicator light, this

indicates a problem has occurred (see “Troubleshooting”).

How to open and to close the drum

1 2 3 4 5 6 7 8 9 10 11 12 ... 71 72

Comments to this Manuals

No comments

Hotpoint-ariston ARTXL 109 User Manual Page 7

Comments to this Manuals

Related products and manuals for Washers Hotpoint-ariston ARTXL 109